In the table in 7.3.5, change the references to dated references. Update the references to current versions,
where applicable (this might be a technical change requiring verification).
Where approved amendments of standards have been incorporated into the base standard, refer to the revised
base standard instead of the amendment: 802.3az is now part of 802.3-2015; 802.11n, 802.11v are
part of 802.11-2012. Update reference to 802.11aa to refer to the approved version, 802.11aa-2012.
Change the ISS reference in the note in clause 5 to be a reference to IEEE Std 802.1AC (no need for a clause
reference).
Other references to specific clauses which need to be dated:
* Clause 5, page 8, referring to Tables 8-1, etc. of 802.1Q
* Clause 5, page 8, referring to 10.2.4.1 of 802.1AS
* Clause 5, page 9, referring to Table 6-6 of 802.1Q
* Clause 6.1, page 11, reference to 802.3az should be replaced by Clause 78 of IEEE Std 802.3-2015
* Clause 6.1 (b) (1), page 11, reference to clause 8.6.8 of 802.1Q
* Clause 6.2, page 11, reference to 802.1Qbb should be changed to 802.1Q. Also remove "IEEE 802.1Qbb" in bullet b).
* Clause 6.2, page 12, reference to Figure 8-11 of 802.1Q
* Clause 6.4, page 12, reference to Clause 35 of 802.1Q
* Clause 6.4, page 12, reference to 6.6.4 of 802.1Q, reference to Table 35-6 of 802.1Q
* Clause 6.4 (b), page 13, reference to clause 35 of 802.1Q
* Clause 6.5, page 14, reference to L.3 of 802.1Q, also 8.6.8.2, Clause 34, and Annex L
* There is a reference to "current 802.11 technologies" which may not be appropriate in a standard.
* Clause 6.5, page 14, reference to 34.6.1 of 802.1Q
* Clause 6.5, page 15, reference to L.3 of 802.1Q
* Clause 6.5, page 15, reference to "standard IEEE 802.3 framing" quoting incorrect maximum frame size;
same error on page 16 (twice)
* Clause 6.6, page 17, reference to 34.3 of 802.1Q
* Clause 6.7.1, page 17, *incorrect* reference to 3.5.1.2 and 3.5.1.3 of 802.1Q, see corrigendum, also in 6.7.2 and 6.7.3
* Clause 6.7.1, page 17, reference in Note to 5.4 of 802.1Q
* Clause 6.7.3, page 18, reference to 11.2.2 and 35.2.2.8.3 b) of 802.1Q
* Clause 6.8, page 18 and 19, multiple references to 802.1Q subclauses: change overall reference to 802.1Q at the top.
* Clause 6.9, page 19, reference to 10.6.2.3 of 802.1AS